S-B10AP(ALP) Automatic Lining- Drying Machine
S-B10AP Automatic Lining- Drying Machine is specially designed for aerosol end. Curled end is separated by a pair of separating knives at end magazine ; then feeding bars send it to lining station. End is lifted up by a turning chuck. A mechanical gun (or electronic gun) undertake the lining task to evenly spray compound along the end fringe. Lined ends are transferred by a turret to enter drying oven. Inside the drying oven, heating air is created and recycled by an electric heater and a blower. Ends are carried up through ten transfer screws and are ejected out through a cam magnetic pad and a magnetic belt. With recycleable lubricating system and multiple safety devices, easy for maintenance and can size changeover.
Specifications
| Machine Type | S-B10AP | |
|---|---|---|
| Range of Can Dia. | 200 - 307 D | |
| Capacity Per Min. | Dome Up to 250 pcs/min. | |
| Cone Up to 200 pcs/min. | ||
| Horse Power Required and Heater | Main Motor | 3HP x 1 |
| End Discharge Motor | 1/4HP x 1 | |
| Blower | 1/2HP x 1 | |
| Heater | 15KW | |
| Compressed Air Required | 3kg/cm2 x 20L/Min. | |
| Floor Space Overall Height | 2300L x 1100W x 2820H mm | |
| Net Weight | 2500 kgs | |
Features
- With single nozzle for compound spray, easy to adjust the film volumn.
- Drying Oven is vertical design, hence save space.
- Safety devices provided to ensure M/C running safely.
- Auto temperature controller enable to adjust the best curing temperature.
- Easy adjustment and quick for can size change over.
- Mechanical lining gun equipped , Electric lining gun is available on request.
- Drying oven equipped with electric (resistance) heating system.
- Ends are lifted by eight screw posts in drying oven and carry out by a magnet conveyor.
- System for variable lower chuck speed control by an inverter is available on request.
- Recommended for Water base compound.
Layout Dimension
